Automatic Armature Winding Machine Rotor Electric Motor Production
1. This armature assembly line is of high automation.
2. The working effiecency is high, and it saves labor cost.
3. The armatire machines detect the unquanlifed rotor automaticlly.
4. The production line decreases the larbor cost.
This electric motor production line including: shaft pressing
machine, end cover pressing machine, commutator pressing machine,
armature insulation paper inserting machine, armature winding
machine, commutator hot stacking machine, armature wedge inserting
machine and armature testing machine.
Shaft press---end cover press---commutator press----armature
insulation paper inserting---armature winding—commutator
welding----wedge inserting— armature testing.
armature production machine.pdf
Click below picutre to view the vidio.
Shaft pressing machine
Shaft Pressing machine is used to insert shaft into lamination.
User only need to load lamination and shaft. Then machine will do
End cover machine
After shaft inserted, assembly line will transfer the rotor to next
station. And it will do end cover inserting.
It adopts vibration boult feeding method.
Commutator Pressing machine
This machine is used for pressing commutator onto the shaft.
Machine can automatic feeding commutator and armature core. This
machine can also be connected to a production line to achieve mass
Insluation paper inserting machine
This machine is used to inserting paper into rotor slot. The
insulation material can be as per customer's requirement, DMD, DM, polyester film are all can be used in this machine.
Rotor winding machine
After doing paper inserting machine, mechanical arm and converyor
will carry the rotor the rotor winding machine position. The
machine is equipped with touch screen and PLC, winding parameter could be set
and modified on the screen.
Commutator welding machine
It can weld both riser and hook type commutators. This machine is
applied to DC motor and universal motor. It is controlled by PCL,
all the data setting can be done on the touch sreeen. There are
four power control method, namely secondary constant current,
secondary constant voltage secondary constant frequency.
Wedge inserting machine
The wedge material can be as per customer's requirement, DMD, DM, polyester film are all can be used in this machine.
Rotor testing machine
It is suitable for testing less than 72 segments armature. The
Voltage withstand test time could be set as per different
requirements. Testing items could be screened.Testing data saved
automatically, and could be traced and printed at any time.