Rotor Automatic Aluminium Die Casting Machine With Water Cooling
(1) Technical requirement
1.The die-casting machine is controlled by PLC.
2. Injection cylinder has three different injecting mode, slow
injecting, fast injecting and secondary injecting. The injecting
flow of fast injecting can be manually adjusted.
3. Machine is equipped with auto feeding device, cutting device and
mold unloading device.
4.This machine has protector doors on all sides. It is pneumatic
protector door in the fore-and-aft direction.
5. Machine is equipped with water cooling system.
6. Each machine is equipped with two pieces of stuff canister,
which is customized.
|mold clamping force||1000Kn|
|Oil cylinder travel||480mm|
|injection cylinder travel||180mm|
|Working station area||680x820mm|
|injection chamber OD||60—120 mm|
|Motor power||15—4 KW|
|Oil pump model number||CY—63|
(3) Machine feature
1.Rapid mould closing
2. With feeding, cutting and mold unloading device
3. It can once make four products if the rotor outside diameter is
Rotor die casting machine working process